Cummins AdBlue Pump – Emitec Dosing Module Repair

£395.00

  • Euro 4 and 5
  • Full Recondition of DAF / Emitec /Cummins / ADL / Temsa / VDL / Optare / Yutong Dosing Module
  • 1612308, 1705244, 1138505, 4931694, 5273338, 1409391, A034J233

 

APPLICABLE VEHICLES

Cummins Euro V Engine:

  • DAF LF
  • DAF CF (Lighter Rigid Chassis’)
  • VDL SB200
  • ADL

The Cummins AdBlue pump / Emitec dosing unit is a Gold Test-Level product and is a premium product within the range. One of the top selling product lines, offering repair, service exchange & new.

The new option available supplied directly from the OE supplier and have a limited failure rate.

The remanufactured option – both repair and service exchange, go through a series of rigorous assessment and testing procedures, with the
result being a ‘new’ standard unit.

All key replacement parts are kept on stock, so the standard lead time always remains the same.

The range also benefits from a high percentage of recycled parts either from our core base or the ability to re-use elements within the same unit.

 

WHAT WE TEST

AdBlue Quality Tested – value should be 32.5%, with workshop capabilities extending too:

  • Testing AdBlue Grading
  • Contamination/presence of non-AdBlue solution
  • Full Report, with sample of fluid

AdBlue Pressure:

  • Accurate test of pressure readings
  • Replace system with new components when faulty
  • Urea Injection speed and amount

 

WHAT WE REMAN

  • Seals and Air Solenoid replaced as standard
  • System completely flushed of fluids and cleaned
  • Inline Filters replaced
  • Remove built up debris and any crystalised AdBlue
  • Full atheistic refurbishment

 

SPECIFICATIONS

  • OEM Manufacturer – Cummins
  • OEM Part Numbers – 5273338, 1705244
  • Euro Rating – 5
  • Size – OEM Standard
  • Weight (Packaging Dimensions) – 6Kg 30x30x30cm
  • Colour – Black
  • Test Standard – Gold
  • Repair Standard – Gold
  • Programming – None
  • Voltage – 24v
  • Carbon Savings – 16.12Kg
  • Part Number – AEM5002

 

KEY BENEFITS OF USING REMAN PARTS

  • Gold Test capability
  • High percentage of recycled parts
  • Key replacement parts kept in stock
  • 99% repair success rate
  • Service Exchange Available
  • Massive cost savings
  • Reduce e-waste
  • Help decarbonisation

 

UNIT FUNCTION

A crucial component in the Selective Catalytic Reduction (SCR) System. Specifically designed to dispense the correct dosage of the AdBlue – also known as Diesel Exhaust Fluid (DEF) – to reduce the amount of harmful nitrogen oxides released into the air.

*We aim to fully recondition your product at the price stated above, however, in the event that your product requires additional parts to the standard repair, we will quote you the new price before we carry out any more repairs.

 

Please note our New Number is 0114 308 7760:

 

Inquire within. Please call 0114 247 7041 for more information.

Description

  • Euro 4 and 5
  • Full Recondition of DAF / Emitec /Cummins / ADL / Temsa / VDL / Optare / Yutong Dosing Module
  • 1612308, 1705244, 1138505, 4931694, 5273338, 1409391, A034J233

 

APPLICABLE VEHICLES

Cummins Euro V Engine:

  • DAF LF
  • DAF CF (Lighter Rigid Chassis’)
  • VDL SB200
  • ADL

The Cummins AdBlue pump / Emitec dosing unit is a Gold Test-Level product and is a premium product within the range. One of the top selling product lines, offering repair, service exchange & new.

The new option available supplied directly from the OE supplier and have a limited failure rate.

The remanufactured option – both repair and service exchange, go through a series of rigorous assessment and testing procedures, with the
result being a ‘new’ standard unit.

All key replacement parts are kept on stock, so the standard lead time always remains the same.

The range also benefits from a high percentage of recycled parts either from our core base or the ability to re-use elements within the same unit.

 

WHAT WE TEST

AdBlue Quality Tested – value should be 32.5%, with workshop capabilities extending too:

  • Testing AdBlue Grading
  • Contamination/presence of non-AdBlue solution
  • Full Report, with sample of fluid

AdBlue Pressure:

  • Accurate test of pressure readings
  • Replace system with new components when faulty
  • Urea Injection speed and amount

 

WHAT WE REMAN

  • Seals and Air Solenoid replaced as standard
  • System completely flushed of fluids and cleaned
  • Inline Filters replaced
  • Remove built up debris and any crystalised AdBlue
  • Full atheistic refurbishment

 

SPECIFICATIONS

  • OEM Manufacturer – Cummins
  • OEM Part Numbers – 5273338, 1705244
  • Euro Rating – 5
  • Size – OEM Standard
  • Weight (Packaging Dimensions) – 6Kg 30x30x30cm
  • Colour – Black
  • Test Standard – Gold
  • Repair Standard – Gold
  • Programming – None
  • Voltage – 24v
  • Carbon Savings – 16.12Kg
  • ATT Part Number – AEM5002

 

KEY BENEFITS OF USING REMAN PARTS

  • Gold Test capability
  • High percentage of recycled parts
  • Key replacement parts kept in stock
  • 99% repair success rate
  • Service Exchange Available
  • Massive cost savings
  • Reduce e-waste
  • Help decarbonisation

 

UNIT FUNCTION

A crucial component in the Selective Catalytic Reduction (SCR) System. Specifically designed to dispense the correct dosage of the AdBlue – also known as Diesel Exhaust Fluid (DEF) – to reduce the amount of harmful nitrogen oxides released into the air.

*We aim to fully recondition your product at the price stated above, however, in the event that your product requires additional parts to the standard repair, we will quote you the new price before we carry out any more repairs.

Please note our New Number  – 0114 308 7760

Additional information

Manufacturer brand

, , , , , , ,

Product type

AdBlue Pumps

Industry

Bus, Coach, Truck

Condition

Remanufactured

Anything you can't find? Get in touch...

Call or email us below!

Contact us Call us

FAQs

What is ECU testing?

Our ECU testing facilities allow us to pin point the faults that lie behind the ECU failure if indeed there is one. We would carry out varies tests and assessments to ensure the units operation meets the OEM requirements.

Why does an ECU fail?

An ECU can fail for various reasons and its not as simple as it may sound. ECU’s have circuits that operate various parts of the vehicles. Communication faults generally would be the symptoms of an issue with the unit, faults would typically be a voltage spike or water ingress causing a burn out of the units PCB.

Has my AdBlue Pump failed?

Adblue pump failures are very common in commercial vehicle and public transport sectors. Failures in the main come from a lack of maintenance of the systems, lack of maintenance can cause crystallisation issues which also lead to the system not operating correctly. Other failures can range from communication faults, Oil, coolant or fuel contamination, blowing fuses, water Ingress, various intermittent faults, various sensor faults, fault codes In units, connector and pin damaged.

How much do AdBlue Pumps cost?

Adblue pump costs can range dependant on what’s requested from the unit its self. If we a traditionally pumping unit the costs are lower than that of a unit that is programmed specifically to the vehicles chassis.

Where are AdBlue Pumps located?

Pumps on a bus/coach would be located at the rear of the vehicle close to the exhaust system and in contrast to a truck these would be located on the chassis of the tractor unit toward the second axle close enough to the exhaust system.

What Instrument Clusters can we remanufacture?

There are a few instrument cluster manufacturers but in the main the manufacturers within our industry consist of Continental (Germany), DENSO (Japan), Magneti Marelli (Italy), Robert Bosch (Germany), Here at ATT our team have the capabilities to repair and restore these products back to OEM standard.

What is Instrument Cluster testing?

Instrument cluster testing is an instrument cluster that is placed on a test bed and checked for various signals, voltages and visual dial checks. Here at ATT, we have all those in house capabilities.

What is an Instrument Cluster?

An instrument cluster repair is a wide term and symptoms of these needing a repair can be, gauge faults, warning light faults, back light or Illumination faults, water Ingress, screen faults, CAN signal failure, audible warning fault, mechanical air gauge faults all of which can cause significant issues but these can all be repaired through our specialist remanufacturing team.

Can you repair a part which is not listed on your website?

We can remanufacture just about any electrical or electronic part on any bus, coach, truck, crane or plant equipment other than rotating units e.g. starter motors and alternators. We specialise in the remanufacture of:

  • Instrument Clusters
  • ECUs
  • Adblue Pumps
  • Gearbox Lids
  • Switches
  • Speedos
  • Switch Panels
  • PCBs
  • Harnesses
Please feel free to contact us to discuss any items you may have for repair.

Contact Us

What warranty do you offer on a remanufactured part?

At Alliance Transport Technologies we provide quality remanufactured parts with a 12-month warranty, giving you complete peace of mind.

Will my part need to be re-coded to my vehicle after it has been repaired?

Most modern ECUs, instrument clusters, adblue pumps, gearbox lids and gear selectors are coded to vehicles. When we repair your unit, as long as it is refitted to the same original vehicle, there will be no need to re-code it. Not only will you then be saving 60-70% off the price of a new unit when we repair yours, but you will also be saving up to £200 on the price of having a new unit coded to your vehicle.

Do you have a free collection service?

No we don't (currently).

Contact Us

Do you offer a drop in service?

Yes we have a drop in service. Bring your urgent vehicle off road (VOR) parts to us and we will do our best to repair your part whilst you wait. All we ask is that you contact us prior to visiting to ensure a suitable engineer is available. Please allow 3-4 hours for this service. This is a very popular service and is strictly first come first served. A £45.00+VAT charge may be applicable.

Contact Us

How long will my repair take?

We aim to complete the repairs to your unit on the same day we receive it. We pride ourselves on fast turnaround times. Day 1 - You can phone, email or fill in our online collection form and we will organise a free collection of your part from anywhere in mainland UK Day 2 - Your part will be remanufactured, tested and quality checked before being dispatched back to you. All remanufactured parts come with a full 12 month warranty. Day 3 - You receive your part to be refitted with peace of mind that you have a quality remanufactured part supplied with a 12 month warranty resulting in minimised downtime and maximised cost savings

[]