New Techno-Boost Powervamp APV0002

  • Powervamp Technoboost TB1224HDD
  • COM-TECHNOBOOST-1224HDD, TB1224HDD, 2211294

Tough 12v / 24v jump‐starter designed for frequent starting of commercial vehicles. The 1224 HDD is intended for heavy or regular 24 volt starting and 12 volt van starting. This unit is for fleet users, operating diesels typically up to 15 litres.

 

Specification

  • Built-in 3-stage 2.3 amp charger and side-mounted IEC mains input socket.
  • LED indicator lights, instead of digital voltmeters, indicate when pack is on charge and battery charge status.
  • 2-metre lead and rubber 3-pin NATO plug
  • Separate 2-metre colour-coded lead with 500 amp cast brass and braided croc clips for connection to vehicle batteries.
  • Auto-selecting 110/220v AC internal charger system

 

Repair Capabilities

We provide you with a complete end to end remanufacturing service. Your unit will undertake a comprehensive standard operating procedure, ensuring your remanufactured unit follows the same process every time, providing you with a quality-assured service you can rely on.

 

Read more

New MR26 Battery Boost Pack Powervamp APV0004

  • Powervamp M26 Battery Boost Pack
  • COM-MR26-12HSP, , MR26 12V, MR2612V, 2211294

High-powered 12v starter pack for frequent, everyday professional use. Suitable for starting all sizes of petrol engines including 4×4. All 12v Diesel, 1.8–3.5 litres, depending on vehicle type.

 

Specification

  • Surge protection and reverse polarity warning
  • Specially toughened shatterproof impact resistant polymer case
  • Top mounted charging/accessory socket – can be charged from vehicle
  • 2‐metre detachable leads will reach all vehicle batteries
  • Top quality braided and insulated crocodile clips
  • Integral 2.7 amp 3‐stage switch mode fully automatic charging system operates on 110v or 220v AC supply voltage
  • Four LED battery status display
  • LED integral mains charging status display
  • Key switch isolator for safety and ease of use

 

Repair Capabilities

We provide you with a complete end to end remanufacturing service. Your unit will undertake a comprehensive standard operating procedure, ensuring your remanufactured unit follows the same process every time, providing you with a quality-assured service you can rely on.

 

Read more

New Battery Boost Pack Alliance ABPTR1224

The ABPTR 12/24 battery jump start pack from Alliance Transport Technologies has been specifically designed for numerous start-ups of large commercial vehicles. The battery boost packs are fitted with high capacity batteries, resulting in high cranking capabilities. The large power output ensures peak performance under key maintenance operations, such as fuel bleeding, oil pressure build-up, tail-life cycling as well as recurrent engine starting.

 

The ABPTR-1224 is fitted with 2 x PC1100 Enersys lead batteries. A standard Anderson Connector is used on each pack and voltage can be switched between 12, 24V and off. Using the three-way voltage dials avoids shortage and contact welding that may occur with traditional on/off isolator switches. Industrial croc clips with a built-in 1000A safety fuse reduces the likelihood of voltage loss. Storage holders on the reverse of the unit allow for safe storage of cables when not in use.

 

The pack is fitted with a digital voltmeter to display the available life of the batteries. This can also be used to test the alternator voltage output. In addition, the units are fitted with an anti-surge PCB board to avoid any power surges.

 

With the pack firmly on the ground, an engine is easily reachable with large output cables included. The pack also has a built-in trolley, making it easy to move around large sites.

 

The pack comes with a 7.0A premium external smart charger that can also recharge and maintain external batteries.

 

Typical Engines

Petrol – All

Diesel – Up To 18 Litres

 

Specification

  • High capacity Enersys PC1100 lead batteries
  • 3 point voltage switch to avoid contact welding and breakage
  • Digital voltmeter to display battery life and voltage of the alternator
  • Charger also acts as an external battery charger
  • Anti-surge PCB board to avoid spikes
  • 1000 Amp safety fuses
  • Durable plastic case
  • Built in trolley
  • Reverse polarity alarm

 

Features

  • Peak Amps – 2450A
  • Nominal Voltage – 12/24V DC
  • Standing Voltage – 12.8V/25.6V DC
  • Amp/Hour Capacity – 45/45 Ah @10hr date (20ºc)
  • Fuse Rating – 1000A
  • Operating Temperature – -40ºc to +45ºc
  • Case – ABS Sock Resistant Plastic Casing
  • Charger – Premium 7Ah External Smart Charger
  • Weight – Approx. 37kg
  • Dimensions – 38w x 51h x 15d (cm)

 

 

Read more

New NATO200 Battery Boost Pack Powervamp APV0001

  • Powervamp NATO 200 Battery Boost Pack
  • COM-NATO200DM, 2211296

Ultra heavy duty 12v /24v jump‐pack for regular multi‐starting of large commercial and plant a tough all‐steel powder‐coated case with separate 12v and 24v outlets and independent isolator switches ensures long trouble‐free use and easy service.

 

Specification

  • Voltage spike protection
  • Reverse polarity audio warning
  • Accessory socket
  • Designed for field servicing
  • 1000 amp cast brass and insulated clips with low temperature flexible 50mm sq, 2‐metre lead
  • Plated steel case with charger lead storage
  • Autocell balancing
  • Double safety feature
  • Angled handle for maximum impact protection

 

Repair Capabilities

We provide you with a complete end to end remanufacturing service. Your unit will undertake a comprehensive standard operating procedure, ensuring your remanufactured unit follows the same process every time, providing you with a quality-assured service you can rely on.

 

Read more